DRAWING EQUAL-SIZE PICTURES ON A PAGE


     For more information see the PCL 5 Printer Language
     Technical Reference Manual.

     LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT


     EcE                           Resets the printer.

     Ec&l1O                        Selects landscape
                                   orientation.

     Ec%0B                         Enters HP-GL/2 mode,
                                   using the default picture
                                   frame size and anchor
                                   point.

     IN;                           Initializes HP-GL/2 mode.

     IP500,500,5450,7500;          Sets P1 to (500,500) and
                                   P2 to (5450,7500).

     SC0,10,0,15;                  Sets up user-unit scaling
                                   to range from (0,0) to
                                   (10,15).

     SP1;                          Selects pen number 1.
                                   Even though there is no
                                   physical pen, the SP
                                   command must be used to
                                   enable printing.

     PA0,0;                        Begins absolute plotting
                                   from the origin (0,0).

     PD10,0,10,15,0,15,0,0;PU;     Pen Down and print from
                                   (0,0) to (10,0) to
                                   (10,15) to (0,15) to
                                   (0,0); then Pen Up.

     IP5550,500;                   Inputs a new P1 and
                                   allows P2 to
                                   automatically follow it.

     PA 0,0:                       Begin absolute plotting
                                   from the new origin.

     PD10,0,10,15,0,15,0,0;PU;     Pen Down and print from
                                   (0,0) to (10,0) to
                                   (10,15) to (0,15) to
                                   (0,0); then Pen Up.

     Ec%0A                         Enters PCL Mode.

     EcE                           Resets the Printer to
                                   complete the job and
                                   eject the page.

            Copyright  Hewlett-Packard Co. 1993
   The information contained herein is subject to change
                      without notice.
   Hewlett-Packard shall not be liable for incidental or
  consequential damages in connection with the use of this
                         material.