COMMON PJL COMMANDS--4 FAMILY


     The following are commonly used PJL commands to change
     default menu settings for the LaserJet 4 family and
     above.  The command used is the "DEFAULT" command which
     permanently changes the default menu setting.  To
     change default settings for just the current job
     replace "DEFAULT" with the "SET" command.


SYMBOL SET

     The following command permanently changes the default
     menu setting of the LaserJet 4 family to the PC-8
     symbol set.

      Ec%-12345X@PJL DEFAULT LPARM : PCL SYMSET = PC8

      Ec%-12345X

FONT NUMBER

     The following command permanently changes the default
     menu setting of the LaserJet 4 family to font number 2.

     Ec%-12345X@PJL DEFAULT LPARM  : PCL FONTNUMBER = 2

     Ec%-12345X

PITCH SIZE

     The following command permanently changes the default
     menu of the LaserJet 4 family to a pitch size of 16.67.

     Ec%-12345X@PJL DEFAULT LPARM : PCL PITCH = 16.67

     Ec%-12345X

     NOTE:     Variables are .44 to 99.99

POINT SIZE

     The following command permanently changes the default
     menu of the LaserJet 4 family to point size 20.

     Ec%-12345X@PJL DEFAULT LPARM : PCL PTSIZE = 20

     Ec%-12345X

          NOTE:  Variables are 4 to 999.75

FORMLINES

     The following command permanently changes the front
     menu panel of the LaserJet 4 family to 66 lines per
     page.

     Ec%-12345X@PJL DEFAULT FORMLINES = 66
     Ec%-12345X

          NOTE:  Variables are 5 to 128

PAPER SIZE

     The following command permanently changes the default
     menu setting of the LaserJet 4 family to a paper size
     of legal.

     Ec%-12345X@PJL DEFAULT PAPER = LEGAL
     Ec%-12345X

          NOTE:  Variables are Letter, Legal,
                 Executive, Com10, B5, A4, C5, DL
                 and Monarch

ORIENTATION

     The following command permanently changes the default
     menu setting of the LaserJet 4 family to Landscape
     orientation.

     Ec%-12345X@PJL DEFAULT ORIENTATION = LANDSCAPE

     Ec%-12345X

COPIES

     Ec%-12345X@PJL DEFAULT COPIES = 1 to 999
     Ec%-12345X

MANUAL FEED

     Ec%-12345X@PJL DEFAULT MANUALFEED = ON or OFF
     Ec%-12345X

ECONOMODE ( LASERJET 4L / 4ML and LASERJET 4P/4MP )

     Ec%-12345X@PJL DEFAULT ECONOMODE = ON or OFF
     Ec%-12345X

DENSITY

     Ec%-12345X@PJL DEFAULT DENSITY = 1, 2, 3, 4 or 5

     Ec%-12345X

          NOTE:  Not supported on LaserJet 4Si /
                 LaserJet 4SiMX
                 Read-only on the LaserJet 4 /
                 4M

RESOLUTION

     Ec%-12345X@PJL DEFAULT RESOLUTION = 300 or 600

     Ec%-12345X

          NOTE:  Not supported on LaserJet 4L / 4ML
                 printer.
                 Read-only on LaserJet 4 / 4M printer.



RESOLUTION ENHANCEMENT

     Ec%-12345X@PJL DEFAULT RET = OFF, LIGHT, MEDIUM OR DARK

     Ec%-12345X

          NOTE:  On the LaserJet 4Si / 4SiMX the variables
                 are ON or OFF only.


JOB OFFSET ( LASERJET 4SI / LASERJET 4SIMX )

     Ec%-12345X @PJL DEFAULT JOBOFFSET = ON or OFF
     Ec%-12345X



OUTBIN ( LASERJET 4SI / LASERJET 4SIMX )

     Ec%-12345X@PJL DEFAULT OUTBIN = UPPER or LOWER

     Ec%-12345X



DUPLEX ( LASERJET 4SI / LASERJET 4SIMX )

     Ec%-12345X@PJL DEFAULT DUPLEX = ON or OFF
     Ec%-12345X




            Copyright  Hewlett-Packard Co. 1993
   The information contained herein is subject to change
                      without notice.
   Hewlett-Packard shall not be liable for incidental or
  consequential damages in connection with the use of this
                         material.